Bathroom Pod – Toilet, Shower & Vanity

Everything a bathroom needs, in a single pod you can place almost anywhere. Toilet, shower and vanity sit together behind one lockable door, finished in soft marble-look panels with matte black tapware and timber-look floors.

It arrives with the electrical already fitted and a hot water system included, so there are no add-ons to choose. Once it's on site, your licensed plumber and electrician make the final connections, to mains or to a waste tank if you're off-grid.

Where it works well

• A second bathroom beside a cabin, granny flat or studio
• Farms, acreage and remote properties
• Building sites and work crews
• Holiday properties, venues and events

Dimensions

• Length: 2.24 m
• Width: 1.45 m
• Height: 2.30 m
• Approx. weight: 760 kg

Inside

• Walk-in shower behind a sliding frosted-glass screen, with an overhead rain head, a handheld on an adjustable rail and a matte black mixer
• Close-coupled toilet with a soft-close seat
• Two-door vanity with a porcelain basin and matte black tap
• Mirrored shaving cabinet
• Frosted window with a pull-down blind for privacy and fresh air
• LED ceiling light, exhaust fan and a power point
• Floor waste for easy cleaning

Tapware and fittings are WELS rated and WaterMark certified.

How it's built

The frame is galvanised steel, epoxy-coated and painted black, wrapped in 50 mm insulated panels. Outside, the panels carry a dark grey woodgrain texture; inside, a wipe-clean marble-look lining. The roof is insulated with glass wool under a dark grey steel sheet, and the floor sits on a magnesium composite base that stands up to water, rot and insects, finished in timber-look vinyl. The door is a 50 mm insulated panel with a vent louvre and keyed lock, and the window is double-glazed with frosted glass.

Electrical, hot water and plumbing

The light, exhaust fan, power point and wiring are installed in our factory using RCM-approved parts, and a hot water system comes with the pod. Water supply and waste are run to every fixture, with the connection points grouped at the back of the pod. On site, your electrician brings power to the supply lead, then tests and certifies the installation to AS/NZS 3000, and your plumber connects to mains sewer or a waste tank.

Getting it to you

We deliver Australia-wide from our yard in Stapylton, QLD. Lifting lugs, forklift pockets and tie-down points are built in. A crane truck can set the pod down up to about 6 m from where it parks, while a tilt tray slides it off the back and needs around 10–15 m of straight, clear run.

What we supply

We build, wire and deliver the pod, and send installation instructions and footing plans with it. Site preparation, setting the pod in place and the final service connections are yours to arrange through licensed trades. We're happy to pass on a list of installers.